The following procedure is intended for vehicles requiring min. 2 coded keys. Turn ignition OFF. Turn ignition ON (wait about 5 seconds), PATS LED is on. Turn ignition OFF and remove key. Insert the next key and turn the ignition ON (PATS LED off after about 5 seconds) Turn OFF the ignition and wait 60 seconds.
Code P2237 is a code indicating the O2 sensor heater circuit is open or shorted causing the circuit voltage control to be open. This will cause the fuel feedback control to not work and the ECM to put the engine into failure mode. This will also cause the vehicle to fail emissions testing. The following table shows 2003/2004/2005/2006/2007 model year vehicles are equipped with CAN. Optionally, you can inspect your vehicle's OBD II connector pinout to determine if the vehicle supports CAN. Auterra scan tools support all 1996 and newer vehicles. Your 1996 and newer vehicle *will* work, even if your vehicle is not listed below.
POB24 - Hybrid Battery A Voltage unstable. PODC9 - Balancing circuit "H" Stuck on. The car START/STOP feature that turns off the engine at stop lights stopped working. Engine and transmission would surge while driving. The engine would stay on while coasting down hills or to stop lights.
Ford Explorer OBD port locations. 2002-2006 2007-2010. Ford Explorer OBD port locations. 2002-2006 2007-2010.
OBD has existed in various forms long before anyone ever uttered the words “infotainment” or “connected car.”. It came about primarily because of two factors: The need to regulate
6A8M66.
  • ogpo27z7cm.pages.dev/183
  • ogpo27z7cm.pages.dev/7
  • ogpo27z7cm.pages.dev/535
  • ogpo27z7cm.pages.dev/596
  • ogpo27z7cm.pages.dev/381
  • ogpo27z7cm.pages.dev/341
  • ogpo27z7cm.pages.dev/95
  • ogpo27z7cm.pages.dev/525

    • ford c max 2007 obd location